20 Top Tips For Deciding On Robotic Pool Cleaners

The Top 10 Cleaning Techniques Based On The Particular Features Of Your Pool
To select the ideal robotic cleaner, it is essential to understand the particular features of your pool. It is important to match the robot's performance with your pool. The robot is an expensive investment. If you don't pay attention to these factors, it could result in a poor cleaning or even harm to the equipment or your pool. It can also cause the buyer to become frustrated. This guide will provide the top 10 specs you need to be aware of before making a pool purchase.
1. Primarily Surface Materials:
The most important factor. The finish on the interior of the swimming pool dictates the kind of brushing mechanism robots should use to be able to clean it without causing damage.
Concrete/Gunite/Plaster (including Pebble Tec & Quartz): These are rough, durable surfaces that often develop algae films. A robot is required to scrub and scour this surface using bristles which are rigid and coated with vinyl or nylon.
Vinyl Liner Vinyl Liner soft and flexible material that can easily be damaged or punctured. Robots for vinyl need to have non-abrasive, soft brushes (usually made from 100% vinyl or Rubber) and wheels with no sharp edges. Use of a cleaner that has rigid brushes for concrete may prematurely wear the liner out.
Fiberglass Shells The shells of fiberglass are extremely smooth and have an emulsified finish. Materials that are abrasive can scratch them similar to vinyl. The best robots are those that have brushes that are not brushed or brushes made of soft rubber. It's also possible that robots make use of less power to clean the surfaces when they are smooth.

2. Shape and Complexity of Pools:
The length as well as the navigation information required by your pool are directly determined by the geometry.
The most straightforward pool to clean is a simple rectangular. Robots with random-path paths are able to effectively clean it. These pools can be difficult for robots to navigate because of their curves and the nooks. It is best to choose a robot that has advanced navigation algorithms (gyroscopic and smart-sensing).
Coves, Ledges and Transitions The transition from the pool's floor to the wall (the "cove") is an area where debris may settle. Make sure the design of the robot permits it to wash this curved area. If your pool features large flat ledges, or sun shelves (Baja shelf) ensure that the robot can climb over them and clean. Certain models were made for floors and walls.

3. The dimensions of the pool (length, width and the maximum depth) are:
The requirements for these measurements must be fulfilled in order to select a power cord that is appropriate.
Cable Length: The general rule of thumb is that the robot's cable should be at least as long as the longest dimension of the swimming pool (usually the length), plus a few extra feet to accommodate the route around the perimeter as well as to ensure the power supply can be placed well away from the water. For pools with medium size 60 feet of cable should suffice. Take a look at the longest length of your pool before shopping.
Depth Capability Many modern robotics are able to clean deeps of 8-10feet without any issues. If you have a swimming pool that is deeper than 10 feet, you will need to check the maximum power of your robot. If you go over it and the motor of the pump will be strained and the warranty void.

4. Water Levels and Tile/Coping Information
It is essential to wash the space between the water and the structure of the pool.
Waterline Tile Cleansing The Waterline Tile Cleansing feature is an essential feature for robots that are mid- to high-end. If you're experiencing persistent scum lines on tile glass, stone, or even tile at the waterline, then you need a machine that is specifically marketed as having superior waterline cleaning capabilities. The robot will feature an entirely different pattern of climbing, and a separate brush on top.
Concrete, pavers or stones can be used to cap the wall of a pool. If it has a sharp, aggressive overhang, it can potentially snag or abrade the robot's cable over time. When you are routing the cable, be aware of this.

5. There are numerous elements and obstacles within the pool.
It is easier to maintain a pool that is clear than one that is cluttered with dangers.
Main Drains & Vents: Ensure the main drain covers are securely secured and in line with the floor of the pool. The drainage vents that are older and protruding can be a trap for smaller robots. The majority of floor water returns vents are not a source of difficulties.
Steps, Ladders and Built-in seating can disrupt the robot's routine of cleaning. Ladders with legs positioned on flooring could catch robots. Robots with enough strength and traction are required to clear and climb stairs and benches. Simple random navigation robots can stay clear of these areas, but better models will be able to handle them.
Clean these large flat surfaces, just like you would steps. Check if the robot can safely traverse horizontal surfaces.

6. Pool Entry and Exit Points (for the Robot):
You should consider the practicalities in how you are going to take the robot out and back in the water.
Physical Access: Do you need to transport the robot down a set of stairs or across a deck and then lower it in? If that's the case, then weight becomes a big factor. A 25-pound robot is much less difficult to manage weekly than a 40-pound one. A storage caddy will be practically essential in this scenario.
Above-Ground pools: Robots that are designed specifically for aboveground pools are less common. They are lighter and aren't designed to climb up walls. They're designed specifically for the ground and the lower walls.

7. Type and volume of debris:
The primary "job" you'll need the robot to do will determine the features it needs to have.
Filtration system: If fine dust/pollen/sand is your primary concern It is crucial that you use an industrial robot equipped with ultra-fine filter cartridges (pleated paper or extremely tightly woven mesh) to catch microscopic particles. It is essential that your robot comes with ultra-fine filters (pleated papers or meshes that are very fine dimension) and can use effective methods to catch tiny dust particles.
Leaves Twigs and Acorns You require a robot which includes a large trash bin/bag with powerful suction pumps and an intake that won't easily clog. Certain top-end models have impellers that are specifically made to break down large leaves and avoid from clogging.

8. The place of the power source, as well as the type of outlet:
Robotic cleaners run on low-voltage DC electric power that is supplied by a transformer plug-in.
GFCI Outlet: For safety reasons, the power source is required to be connected to the Ground Fault Circuit Interrupter outlet (GFCI). This is a non-negotiable requirement. You will need an electrician to put one in If you don't already have one.
Distance from Pool. The transformer shouldn't be further than 10 feet from the edge of your pool. This will keep it protected from splashes and bad weather. The cable should be long enough to reach the pool at the furthest corner.

9. Storage and climate conditions:
The way you keep your robot will alter its lifespan.
The storage of robots in the off-season is strongly discouraged by the majority of manufacturers. UV rays can damage cables and plastic. If you do not intend to be using the robot for a long time, it is ideal to store it in a dry, cool area.
In-Season Use: When you regularly use the robot and need to store it, a storage caddy can help you to keep it in a neat place beside the pool without becoming a tangled mess in the deck.

10. The current circulation and filtering system for the pool:
Although a pool robot works in its own way, it is a an integral part of the system.
Complementary Function - Know that the primary function of the robot is to clean debris off surfaces and remove any accumulated dirt. It's not a replacement for the pool's circulation and filtering system. These systems are accountable for removing the dissolved particles, distributing chemicals, as well as preventing algae. The robot acts as a secondary cleaner that significantly reduces the load on your main filter.
Chemical Balance: A clean surface for your pool is vulnerable to algae if the water chemistry is unbalanced. The robot helps maintain cleanliness but it cannot replace the necessity for proper sanitization or water balance. See the top pool cleaning tips for blog tips including pool robot, the pool cleaner, aiper robot, cleanest pool, max pools, aiper pool robot, swimming pool, pool cleaner pool, the pool cleaner, aiper smart pool cleaner and more.



Top 10 Tips To Help You With Your Pool Robot Service, Warranty, And Reputation
The purchase of a robot cleaner for your pool is an important investment. This appliance is designed to operate in an extremely harsh, underwater atmosphere. The performance capabilities may be seductive but the worth and peace of mind are secured at the end of the day by the strength of warranty, the integrity and accessibility of customer support. These are your insurance policy against premature failure and expensive repairs. A solid warranty shows the confidence of a company in its product's reliability. Furthermore, a good reputation for a brand is based on many years of reliable service and pleasant experiences. When an issue arises--as it can in any device of modern technology--a fast and competent customer service becomes the most important feature of all. In the absence of this information, you can turn a luxury purchase into an expensive and annoying paperweight.
1. Understanding the Warranty Structures: Seals, Parts and Labor.
A warranty cannot be viewed as an entire. It is necessary to understand it. It's commonplace to see a standard "2-Year Guaranteed Full" but what does it actually mean?
Parts: This includes the cost of replacement components like tracks, motors, as well as control boards.
Labor: This is essential. Does the warranty cover the labor of a skilled technician to diagnose the unit and fix it? Certain warranties are "parts only," which means you face the risk of a huge price for repairs.
Seals and Waterproofing: The seals that prevent water from the electronics and motor are critical. It is crucial that seals are covered throughout the warranty period. The failure of these seals could be disastrous.

2. Understanding "In-Warranty" Service Logistics.
Repairing a broken robot is a crucial factor to take into.
Mail-In Service: Most common. It is your responsibility to packaging the unit securely and shipping it, usually at your expense, to a service center approved by you. The unit should be packed with care to avoid damage it is in transit.
Local Authorized Service Centers are a major advantage. Certain brands have the option of local pool service providers authorized to repair warranty issues. This is far more convenient than having to ship a bulky, wet unit across the nation.
Advanced Replacement Programs - A excellent level of service. The company ships the replacement unit to you immediately, often before you've even returned the damaged one, minimizing the downtime of your pool.

3. The importance of a swivel cables warranty.
The swivel cable is the robot's lifeline. It's always moving, subjected to UV light, and can tangle. This is a frequent fault point. Be sure to read the warranty for any mention of the cable. A full warranty must extend the duration of the warranty. Certain manufacturers may treat it as "wear items" and provide the warranty for a shorter period. This can be a significant drawback.

4. Brand longevity and market visibility:
The past is crucial. A company that makes pool cleaners since decades has always enhanced its designs, overcame failure points, established an authentic supply chain and refined its parts. Amazon is filled with fly-by-night brands that sell cheap robots. These companies could vanish in just a couple years and leave you with a useless product with no guarantee. Be sure to stick with companies that have been around for a while and have a solid track record.

5. The value of longevity in Models and Parts Availability.
If you're seeking information on a company's brand, look at how long this model has been around. A model that is in its fifth year of production will probably have all of the defects that were present in the design early on and will have a large range of replacement parts, like filters, brushes or tracks that are which are readily available even after the model has been discontinued. A brand-new, just-released model is an unknown quantity with regard to reliability in the real world.

6. Examining independent reviews and user feedback to find patterns.
Read reviews to identify the common themes. Read detailed reviews to identify common themes.
Positive Patterns: Consistently praised for its quiet operation, cleaning quality, reliability and efficiency over several seasons.
Negative Patterns: Pay careful attention to repeated complaints regarding the same part breaking down (e.g., "my cable broke within 13 months" "the motor seals leaked"), poor navigation, or poor customer service experience. These patterns are indicative of common failures and weaknesses in brands.

7. Evaluate Customer Support Accessibility before buying.
Before buying, verify the channels for customer support of the brand.
Phone Support is there a publically listed number? Call it. Watch how long it takes to connect with a representative on the phone and then assess their knowledge.
Online Resources Do they have a comprehensive website that has downloads of user guides as well as FAQ sections and videos, along with troubleshooting guides and tutorials? This indicates a commitment to customer self-service.
Email/Contact Forms: Send a pre-sales question. The quality and speed with the response you receive can be a good indication of the type of after-sales assistance you can expect.

8. Clarifying the Warranty Registration Process and Requirements.
Understand the steps to activate your warranty.
Does registration need to be completed? Registration is not required for most warranties.
Proof of Purchase: Always retain your original receipt (digital or physical). This is often required to validate warranties, as it establishes the purchase date and the warranty period.
Authorized Retailers: Purchasing from an authorized dealer is often a requirement for warranty validation. You could get your warranty cancelled if you buy from non-authorized third-party sellers.

9. Common Warranty Violating Actions
You can breach the warranty. Some common violations that can invalidate warranties are:
Extension cords are generally not recommended due to the risk of voltage drops and safety hazards.
No GFCI Outlet - Plugging the transformer in the outlet non GFCI outlet can invalidate the warranty. It is a safety issue.
The warranty is not valid if you remove the sealed unit and attempt to fix the electronic or motor components.
Non-OEM Products: The use of third-party filters and brushes that are not specifically designed for the product could end the warranty.

10. The Long-Term Planning Long-term planning: After Warranty.
Think about the entire duration of the product. What happens after your warranty expires?
Cost of Repairs: Inquire about the cost typical of out-of-warranty repairs like the replacement of a motor. Then, you can decide if a repair would be cheaper than replacing the unit.
A reliable company will keep stock of parts for years even after the discontinuation of a model. Brands with less fame may not stock the parts and this could mean that any failure after the warranty period is total loss.
Some models have components such as brushes or tracks which can be easily replaced. This increases the longevity of the product beyond the warranty and reduces cost over the long run. Take a look at the most popular swimming pool robot cleaner for more info including best way to clean swimming pool, best way to clean swimming pool, pool sweep cleaner, pool website, cleaning robot for pool, pool cleaner with hose, robot swimming pool, cleaning robot for pool, swimming pool service companies, smart swimming pool and more.